Mesh bags manufacturer’s products are mainly made of polyethylene, polypropylene, after extrusion, stretching into flat silk after weaving, this bag can be used to pack vegetables, fruits and other things, but the beans and vegetables are not suitable for packing hard lumpy materials.
The relevant provisions standardize the product classification of plastic mesh bags, technical requirements, inspection methods, inspection rules and marking, packaging, transportation and storage. The standard applies to mesh bags made of polypropylene or polyethylene, woven after extrusion and stretching into flat silk. According to the weaving method is divided into two categories: flat weaving, woven, mesh bags and lightweight bags. Flat mesh bags can be divided into three types according to the density of warp and weft: large mesh, medium mesh and desire, and lightweight mesh bags can be divided into two types according to the density of warp and weft: large mesh and small mesh.
Measured by eye under natural light for Mesh bags , with a strong man to accurately measure the width of the folded (bag) edge to 0.1 cm, if any of the listed fails, the sample will fail. If the number of failures exceeds 10% of the number of samples, a second sample should be implemented to recheck the failures. If it still exceeds 10%, the deployment fails. When the supply and demand parties disagree on the quality of the product, they can carry out arbitration inspection according to this standard.
